Once you connect the Konnected device to wifi, it will store the wifi credentials and reconnect automatically to the same wifi network every time. If you need to change the stored wifi credentials or connect the device to a different wifi network, there are a few ways to do this:
-
If the device is online and discovered in the SmartThings app, go to Automation -> SmartApps -> Konnected -> scroll down to Tap to view device status -> scroll down and tap Reconfigure WiFi.
-
The device will automatically fall back into WiFi setup mode after 30 seconds if the previously configured WiFi network is not available or if the password is incorrect.
-
You can connect the device to your computer via USB and issue the command
node.restore()to the device. This will permanently clear the stored wifi credentials from flash memory.
After completing one of the steps above, reconnect to WiFi following these steps.